Commands List

Static commands are the additionals commands made available by RhinoParametrics.

They are accessible via the 2 menu bars :

 

Point: _PPoint Point XYZ Point On Curve Intersect Curve / Curve Intersect Curve / Surface Projection Point / Surface From Relative Point Point on Vertex Point On Edge Point On Face From Relative Point XYZ
Line: _PLine 2 Points
Polyline: _PPolyLine List of Points	Can be closed Fillet Chamfer
Rectangle: _PRectangle Principal Direction Center and Corner 3 Points Center, Length & Width On Curve	Chamfer Fillet
Polygon: _PPolygon Center and Corner Center and Side Center and Radius On Curve
Star: _PStar Center and Corner Center and Radius On Curve	Chamfer Fillet

BSpline: _PBSpline              (Can be closed) List of control Points Spline: _PSpline              (Can be closed) List of Points Circle: _PCircle Center and Corner Diameter Center and Radius On Curve Arc: _PArc 3 Points Center, Radius & Angle On Curve Ellipse: _PEllipse Diameter Center, Length & Width On Curve Fillet Curves: _PFilletCurves Fillet Chamfer
Project Curves / Surface:_PProjectCurve Project Curve
Boundary: _PBoundary Boundary
Offset Curves: _POffsetCurve Offset Curve	Merge resulting curves
Offset Curves on Surface: _POffsetCurveOnSurface Offset Curve On Surface	Merge resulting curves
Extract ISO Curve: _PIsoCurve U / V Parameter Point On Face
Extract Face Boundary: _PContourFace Face Index
Extract Edge: _PEdge Edge Index

Corner: _PCorner 3 Points 4 Points Fill: _PFill List of Boundaries Curves   Plan: _PPlan 3 Points Point & XYZ Point & Normal Point & Nx, Ny, Nz XYZ & Nx, Ny, Nz
Extrude Curve: _PExtrude XYZ Curve Point Normal
Sweep: _PSweep Sweep 1 rail Sweep 2 rails Loft
Revolve: _PRevolve Simple Revolve Rail Revolve
Extract Face: _PExtractFace Face Index

Box: _PBox Principal Direction Center & Corner 3 Points Center, Length & Width On Curve Sphere: _PSphere Point - Radius Diameter Cone: _PCone Center & Corner Diameter Center & Radius On Curve
Pyramid: _PPyramid Center & Corner Center & Side Center & Radius On Curve
Split Cone: _PSplitCone Center & Corner Diameter Center & Radius On Curve
Cylinder: _PCylinder Center & Corner Diameter Center & Radius On Curve
Tube: _PTube Center & Corner Diameter Center & Radius On Curve
Torus: _PTorus Center & Corner Diameter Center & Radius On Curve

Boolean Addition: _PBooleanAddition List of Solids Boolean Difference: _PBooleanDiff Reference Solid & List of subtracted Solids Boolean Intersect: _PBooleanInterection Reference Solid & List of Solids
Extrude Face: _PExtrudeFace XYZ Line Normal

Translate: _PMove Direction Vector From Point to Point Rotate: _PRotate Point & XYZ Point & Normal Point & Nx, Ny, Nz XYZ & Nx, Ny, Nz Scale: _PScale Scale XYZ Point & Scale XYZ Coords & Scale XYZ Symetry: _PMirror Plane Plane XYZ
Orient: _POrientation 2 Points -> Point & Normale 2 Points -> 2 Points 2 Points -> Point & Dir XYZ Point & Dir.XYZ -> Point & Dir.XYZ Object & Orientation
Trim: _PTrim Reference Geometry & List of Splitting Geometry
Explode: _PExplode Reference Geometry
Merge / Join: _PMerge  List of Object
Intersect Surface: _PIntersection  2 Surfaces

Linear Dimension: _PLinearDim 2 Points Angular Dimension: _PAngularDim  2 Curves Radial Dimension: _PRadialDim  1 Curve

Container: _PBody  By Name Construction Plan: _PCPlane 3 Points Point & XYZ Point & Normal On Plane Surface From Rhino CPlane
Parametric Link: _PLink  Reference Geometry
Project preferences: _POptions
Replace function: _PReplace

The standard Rhino commands are what one calls "Dynamic Commands", .
They allow you to work with the asscociative and parametric objects concept while keeping your work habits.

RhinoParametrics is capable of interpreting a large number of Rhino commands.  Some, however, are not interpreted by RhinoParametrics, for example when it is not possible to deduce from the geometry what the user actually intended to do.

When RhinoParametrics interprets a Rhino command, one or more parametric objects are created.
As a function of settings, the objects created are one of the sometimes several possible types made available by the static command.


List of interpreted commands:


General:

• Hide
• Show
• Delete
  
• Copy
• CopyToClipboard
• Paste
  
• PointsOn
• PointsOff
• ClearUndo
  

Selection

Geometric Transformations:

• Move
• Drag
• Rotate
• Rotate3D
• Scale
• Scale1D
• Scale2D
• Mirror
• Explode
• Join

Geometric Objects :